FTORPLAST™ ETFE-HT granulated
ETHYLENE-TETRAFLUOROETHYLENE COPOLYMER, HIGH TEMPERATURE SERVICE GRADE
CHEMICAL NAME: Poly(ethylene-co-tetrafluoroethylene)
SYNONYMS: Copolymer of ethylene and TFE/tetrafluoroethylene, ETFE, E/TFE, ETFE fluoropolymer, ETFE resin, Ethylene-co-tetrafluoroethylene polymer, Ethylene-tetrafluoroethylene copolymer, Ethylene-tetrafluoroethylene fluoropolymer, Polyethylenetetrafluoroethylene, Tetrafluoroethylene-ethylene copolymer
TRADE NAMES : Fluon® ETFE (Asahi Glass Company), Dyneon™ ET (Dyneon), Neoflon™ ETFE (Daikin), Tefzel™ (DuPont)
STRUCTURAL FORMULA: -[- (CH2 - CH2)n - (СF2 - CF2)m -]-
CAS NO. 25038-71-5
H.S.CODE: 3904.69.9000
APPLICATIONS:
1.Wire and cable wraps for numerous applications (airplanes, atomic power plants, computers, furnaces, heaters, near engine zone in mass transport systems, networks, optical fibers, robots, car and industrial sensors, wiring for chemical plants) with recommended.
2.Tubing applications: chemical carriers, tubing coils, complex hoses, co-extruded inner layer within rubber hose for gasoline lines in automotive industry as barrier to volatile organic carbon materials, gas-chromatography pipes, gastro-camera hose.
Upper / Lower service temperature: +210oC (+410oF) / -100oC (-148oF)
|
TYPICAL QUALITY DATA |
||||||||
|
№ |
GRADES
|
100 |
101 |
102 |
104 |
106 |
UNIT |
TEST METHOD |
|
GUARANTEED VALUE |
||||||||
|
1 |
Melt-flow rate, min |
0,1 – 1 |
1 - 2 |
2 – 4 |
4 – 6 |
6 – 8 |
g/10min | ASTM D3159, 297oC (567oF) @ 5kg |
|
2 |
Specific gravity |
1,65 – 1,75 (0,0596 – 0,0632) |
g/cm3 (lb/in3) | ASTM D792 | ||||
|
3 |
Tensile strength, min |
30 (4351) |
MPa (psi, lb/sq in) | ASTM D638 | ||||
|
4 |
Ultimate elongation, min |
180 |
% | ASTM D638 | ||||
|
5 |
Melting point, max |
270 (518) |
oC (oF) | ASTM D3159, DSC | ||||
GUARANTEED STORAGE LIFE: unlimited subject to storage in a clean and dry place
PACKING: 10kg net PE/multi-wall laminated paper bags stacked in 30kg net cardboard boxes/drums
LABELLING: danger symbols, R- and S-phrases: not regulated
