FTORPLAST PVDF granulated

FTORPLAST™ PVDF granulated
MODIFIED POLYVINYLIDENE DIFLUORIDE HOMOPOLYMER

CHEMICAL NAME:       Poly-1,1-Difluoroethene

SYNONYMS:                Polyvinylidene fluoride resin, Poly(vinylidene fluoride) fluoroplastic, PVDF, PVDF resin homopolymer, PVF2

TRADE NAMES:           Dyneon™ PVDF (Dyneon), Kynar® PVDF (Arkema Inc.), Neoflon ® PVDF (Daikin), Solef ® PVDF (Solvay Solexis)

STRUCTURAL FORMULA:       – (- CH2 - CF2 -)n -

CAS NO.:                                 24937-79-9

H.S.CODE:                              3904.69.9000

APPLICATIONS:

1. Due to low flame spread and smoke generation, due to UNUSUAL HIGH ELONGATION (min. 400%), modified PVDF is extruded to insulate wire and cable in computers and other electrical and electronic equipment, to jacket plenum-rated able for voice and video devices and alarm systems.

2. Extruded sheets are applied for lining of chemical reactors and vessels, columns in petrochemical and chemical industries, galvanic baths.

3. Extruded film has unique piezoelectric (10 times larger than observed in any other polymer) and pyroelectric properties applied for manufacturing thermal camera sensors  and  battery applications .

4. By injection and compression molding PVDF can be fabricated into parts of chemical-processing equipment: solid components, fittings, piping (PVDF is the only fluoroplastic available in rigid pipe form), pumps, tubes, valves.

5. Heat-shrinkable tubing of PVDF is used as a protective cover on resistors and diodes, as an encapsulant over soldered joints.

Upper / Lower service temperature: +130oC (+266oF) / -55 oC (-67oF)

TYPICAL QUALITY DATA

               GRADES
PARAMETRES

100

101

102

104

UNIT

TEST METHOD

GUARANTEED VALUE

1

Melt-flow rate

0,1 – 1

1 – 2

2 - 4

4 - 6

g/10min ASTM D1238,
232oC (450oF) @ 5kg

2

Specific gravity

1,75 – 1,80  (0,0632 – 0,0650)

g/cm3 (lb/in3) ASTM D792 @ 23oC(73oF)

3

Tensile strength, min

40 (5802)

MPa (psi, lb/sq in) ASTM D638

4

Ultimate elongation, min

400

% ASTM D638

5

Melting point

145 – 160 / (293 – 320)

oC (oF) ASTM D3418

GUARANTEED STORAGE LIFE: unlimited subject to storage in a clean and dry place.

PACKING: 10kg net PE/multi-wall laminated paper bags stacked in 30kg net cardboard boxes/drums

LABELLING: dangerous symbols, R- and S-phrases: not regulated

 

Print This Page

Products